Description

BMXAMO0410 Isolated analog output module X80 – 4 outputs

Complementary
measurement error	<= 0.2 % of full scale 0…60 °C 0.1 % of full scale 25 °C
temperature drift	45 ppm/°C +/- 10 V 45 ppm/°C 0…20 mA 45 ppm/°C 4…20 mA
minimum crosstalk attenuation	80 dB
Common mode rejection	100 dB
isolation voltage	1400 V DC between channels and ground 1400 V DC between channels and bus 750 V DC between channels
detection type	Open circuit 0…20 mA Open circuit 4…20 mA Short circuit +/- 10 V
load impedance ohmic	>= 1000 Ohm +/- 10 V <= 500 Ohm 0…20 mA <= 500 Ohm 4…20 mA
output level	High level
analogue output number	4
analogue output type	Current: 0…20 mA Current: 4…20 mA Voltage: +/- 10 V
analogue output resolution	15 bits + sign
supply	Internal power supply via rack
conversion time	<= 1 ms
maximum conversion value	0…21 mA 0…20 mA 0…21 mA 4…20 mA +/- 10.5 V +/- 10 V
fallback mode	Configurable Predefined
operating altitude	0…2000 m 2000…5000 m with derating factor
status LED	1 LED (green)RUN 1 LED per channel (green)channel diagnostic 1 LED (red)ERR 1 LED (red)I/O
net weight	0.15 kg
power consumption in W	3 W 24 V DC typical 3.6 W 24 V DC maximum 0.45 W 3.3 V DC typical 0.51 W 3.3 V DC maximum

Environment
vibration resistance	3 gn
shock resistance	30 gn
ambient air temperature for storage	-40…85 °C
ambient air temperature for operation	0…60 °C
relative humidity	5…95 % at 55 °C without condensation
IP degree of protection	IP20
directives	2014/35/EU – low voltage directive 2014/30/EU – electromagnetic compatibility
product certifications	CE RCM CSA EAC Merchant Navy UL
standards	EN/IEC 61010-2-201 EN/IEC 61131-2 UL 61010-2-201 CSA C22.2 No 61010-2-201