Description

Discrete Input Module Modicon Quantum – 32 I – 24 V DC

Main
range of product	Modicon Quantum automation platform
product or component type	Low voltage dc discrete input modules
discrete input number	32

Complementary
group of channels	4
logic input	Positive (sink)
discrete input voltage	24 V DC
input voltage limits	19.2…30 V
voltage state 1 guaranteed	15…30 V DC
voltage state 0 guaranteed	-3…5 V DC
current state 1 guaranteed	>= 2 mA at Us = 5.5 V and Uin = 0 V
current state 0 guaranteed	<= 0.5 mA
addressing requirement	2 input words
input impedance	2500 Ohm
leakage current	200 mA at Us = 5.5 V and Uin = 4 V
absolute maximum input	30 V continuous 56 V during 1.3 ms decaying pulse
response time	<= 1 ms from state 0 to state 1 <= 1 ms from state 1 to state 0
protection type	Input protection by resistor limited
power dissipation	1.7 W + (0.36 x number of points on)
isolation between group and bus	1780 Vrms for 1 minute
isolation between group	500 Vrms for 1 minute
local signalling	1 LED green bus communication is present (Active) 1 LED red external fault detected (F) 32 LEDs green input status
marking	CE
bus current requirement	330 mA
module format	Standard
product weight	0.66 lb(US) (0.3 kg)

Environment
standards	UL 508 CSA C22.2 No 142
product certifications	GOST RMRS RINA BV DNV ABS C-Tick
resistance to electrostatic discharge	4 kV contact conforming to IEC 801-2 8 kV on air conforming to IEC 801-2
resistance to electromagnetic fields	9.14 V/yd (10 V/m) 80…2000 MHz conforming to IEC 801-3
ambient air temperature for operation	32…140 °F (0…60 °C)
ambient air temperature for storage	-40…185 °F (-40…85 °C)
relative humidity	95 % without condensation
operating altitude	<= 16404.2 ft (5000 m)