Description

Discrete Output Module Modicon Quantum – 12 O – 24..125 V DC

Main
range of product	Modicon Quantum automation platform
product or component type	Dc discrete output module
discrete output number	12

Complementary
group of channels	2 groups of 6
discrete output logic	Negative logic (sink)
addressing requirement	1 output word 1 input word
discrete output voltage	24…125 V DC
output voltage limits	19.2…156.2 V
maximum load current	<= 0.75 A at 0…40 °C each point <= 3 A at 32…140 °F (0…60 °C) each group <= 6 A at 32…140 °F (0…60 °C) per module
surge current	<= 4 A for 1 ms
response time	1 ms at state 0 to state 1 1 ms at state 1 to state 0
short-circuit protection	With
output overvoltage protection	By varistor per group
load inductance	No limit (protected by diode)
tungsten load	41 W 115 V 46 W 130 V 8 W 24 V
switching frequency	<= 50 Hz
fault indication	Overcurrent
isolation between channels and bus	2500 Vrms DC for 1 minute
isolation between group	1200 Vrms DC for 1 minute
protection type	Internal output protection by 4 A fuse
power dissipation	1 W + (0.77 x all points on)
marking	CE
local signalling	1 LED green bus communication is present (Active) 1 LED red external fault detected (F) 16 LEDs green input status
bus current requirement	375 mA 6 outputs at state 1 650 mA 12 outputs at state 1
module format	Standard
product weight	0.99 lb(US) (0.45 kg)

Environment
product certifications	RMRS FM Class 1 Division 2 GOST C-Tick
standards	CSA C22.2 No 142 UL 508
resistance to electrostatic discharge	4 kV contact conforming to IEC 801-2 8 kV on air conforming to IEC 801-2
resistance to electromagnetic fields	9.14 V/yd (10 V/m) 80…2000 MHz conforming to IEC 801-3
ambient air temperature for operation	32…140 °F (0…60 °C)
ambient air temperature for storage	-40…185 °F (-40…85 °C)
relative humidity	95 % without condensation
operating altitude	<= 16404.2 ft (5000 m)