Sale!

ATS22C48Q

Original price was: $ 4,960.00.Current price is: $ 3,816.00.

In stock

Add to Wishlist
Category:

Description

Main
range of product Altistart 22
product or component type Soft starter
product destination Asynchronous motors
product specific application Pumps and fans
component name ATS22
network number of phases 3 phases
[Us] rated supply voltage 230…440 V – 15…10 %
motor power kW 132 kW 230 V
250 kW 400 V
250 kW 440 V
factory setting current 437 A
power dissipation in W 218 W for standard applications
utilisation category AC-53A
type of start Start with torque control (current limited to 3.5 In)
IcL starter rating 480 A for connection in the motor supply line for standard applications
IP degree of protection IP00
Complementary
assembly style With heat sink
function available Internal bypass
supply voltage limits 195…484 V
supply frequency 50…60 Hz – 10…10 %
network frequency 45…66 Hz
device connection In the motor supply line
To the motor delta terminals
[Uc] control circuit voltage 230 V – 15…10 % 50/60 Hz
control circuit consumption 20 W
discrete output number 2
discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
minimum switching current 100 mA at 12 V DC (relay outputs)
maximum switching current 5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs
discrete input number 3
discrete input type (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
discrete input voltage 24 V <= 30 V
discrete input logic Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
output current 0.4…1 Icl adjustable
PTC probe input 750 Ohm
communication port protocol Modbus
connector type 1 RJ45
communication data link Serial
physical interface RS485 multidrop
transmission rate 4800, 9600 or 19200 bps
installed device 31
protection type Phase failure: line
Thermal protection: motor
Thermal protection: starter
marking CE
type of cooling Forced convection
operating position Vertical +/- 10 degree
height 455 mm
width 304 mm
depth 339.7 mm
net weight 50 kg
Motor power range AC-3 110…220 kW at 200…240 V 3 phases
250…500 kW at 380…440 V 3 phases
motor starter type Soft starter
Environment
electromagnetic compatibility Conducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards EN/IEC 60947-4-2
product certifications GOST
CSA
UL
C-Tick
CCC
vibration resistance 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
noise level 56 dB
pollution degree Level 2 conforming to IEC 60664-1
relative humidity 0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation -10…40 °C (without derating)
40…60 °C (with current derating 2.2 % per °C)
ambient air temperature for storage -25…70 °C
operating altitude <= 1000 m without derating
> 1000…< 2000 m with current derating of 2.2 % per additional 100 m
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Weight 40.0 kg
Package 1 Height 54.5 cm
Package 1 width 40.0 cm
Package 1 Length 57.5 cm
Unit Type of Package 2 PAL
Number of Units in Package 2 1
Package 2 Weight 40.0 kg
Package 2 Height 54.5 cm
Package 2 width 40.0 cm
Package 2 Length 57.5 cm

Related products