Description
Range of Product | Altistart 22 |
---|---|
Product or Component Type | Soft starter |
product destination | Asynchronous motors |
Product Specific Application | Pumps and fans |
component name | ATS22 |
Phase | 3 phase |
[Us] rated supply voltage | 208…600 V – 15…10 % |
Maximum Horse Power Rating | 100 hp 575 V 30 hp 208 V 40 hp 230 V 75 hp 460 V |
factory setting current | 96 A |
power dissipation in W | 73 W for standard applications |
utilisation category | AC-53A |
type of start | Start with torque control (current limited to 3.5 In) |
IcL starter rating | 110 A connection in the motor supply line for standard applications |
IP Degree of Protection | IP20 |
assembly style | With heat sink |
---|---|
Function Available | Internal bypass |
supply voltage limits | 177…660 V |
supply frequency | 50…60 Hz – 10…10 % |
Network Frequency | 45…66 Hz |
device connection | In the motor supply line |
[Uc] control circuit voltage | 110 V – 15…10 % 50/60 Hz |
control circuit consumption | 20 W |
discrete output number | 2 |
discrete output type | Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O |
minimum switching current | 100 mA 12 V DC relay outputs) |
maximum switching current | 5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs |
discrete input number | 3 |
discrete input type | LI1, LI2, LI3) logic, 5 mA 20 kOhm |
discrete input voltage | 110 V <= 121 V |
discrete input logic | Positive logic LI1, LI2, LI3 < 20 V <= 15 mA > 79 V, <= 2 mA |
output current | 0.4…1 Icl adjustable |
PTC probe input | 750 Ohm |
communication port protocol | Modbus |
Connector Type | 1 RJ45 |
communication data link | Serial |
physical interface | RS485 multidrop |
Transmission Rate | 4800, 9600 or 19200 bps |
installed device | 31 |
protection type | Phase failure line Thermal protection motor Thermal protection starter |
marking | CE |
type of cooling | Forced convection |
operating position | Vertical +/- 10 degree |
Height | 14.02 in (356 mm) |
Width | 5.91 in (150 mm) |
Depth | 9.04 in (229.5 mm) |
Net Weight | 39.68 lb(US) (18 kg) |
electromagnetic compatibility | Conducted and radiated emissions level A IEC 60947-4-2 Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-2 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Voltage/current impulse level 3 IEC 61000-4-5 |
---|---|
standards | EN/IEC 60947-4-2 |
Product Certifications | CSA UL C-tick GOST CCC |
vibration resistance | 1 gn 13…200 Hz)EN/IEC 60068-2-6 1.5 mm 2…13 Hz)EN/IEC 60068-2-6 |
shock resistance | 15 gn 11 ms EN/IEC 60068-2-27 |
noise level | 56 dB |
pollution degree | Level 2 IEC 60664-1 |
relative humidity | 0…95 % without condensation or dripping water EN/IEC 60068-2-3 |
ambient air temperature for operation | 14…104 °F (-10…40 °C) without derating) 104…140 °F (40…60 °C) with current derating 2.2 % per °C) |
Ambient Air Temperature for Storage | -13…158 °F (-25…70 °C) |
operating altitude | <= 3280.84 ft (1000 m) without derating > 3280.84…< 6561.68 ft (> 1000…< 2000 m) with current derating of 2.2 % per additional 100 m |
Category | 22576-ATS22 ALTISTART |
---|---|
Discount Schedule | CP1G |
GTIN | 3606480167430 |
Returnability | Yes |
Country of origin | ID |
Unit Type of Package 1 | PCE |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Height | 10.04 in (25.5 cm) |
Package 1 Width | 12.99 in (33.0 cm) |
Package 1 Length | 16.54 in (42.0 cm) |
Package 1 Weight | 28.70 lb(US) (13.018 kg) |
Unit Type of Package 2 | P06 |
Number of Units in Package 2 | 4 |
Package 2 Height | 29.53 in (75.0 cm) |
Package 2 Width | 31.50 in (80.0 cm) |
Package 2 Length | 23.62 in (60.0 cm) |
Package 2 Weight | 143.46 lb(US) (65.072 kg) |